Skip to contentSkip to navigationSkip to topbar
On this page

How to Set Up and Use a Super SIM VPN


(warning)

New Connections Paused

Twilio's IoT business unit was acquired by KORE. While we are in the process of migrating infrastructure from Twilio to KORE, we have paused adding new VPN connections. If you are looking to use Super SIM but a VPN connection is critical to your use case, please email sales-wireless@twilio.com to let us know and discuss alternatives.

(warning)

Private Beta

Super SIM VPN is in Private Beta . Once you determine that a VPN connection is appropriate for your IoT use case, please reach out to your IoT sales specialist or email sales-wireless@twilio.com to learn more about the process of setting up your VPN connection. You can take a look at Known limitations below.

Super SIM VPN (Virtual Private Network) establishes a secure private network between Twilio and your application data center, and ensures your Super SIM-connected devices use this private network for data communications.

With a regular Internet breakout, the traffic from Super SIM-connected devices will go over the Internet and get routed to your application data center. When a VPN is used, the same traffic is sent over a secure and private tunnel as shown below:

How connections are made via the Internet versus a VPN.

With a VPN, you get these benefits:

  • A secure channel — The traffic moving between Twilio and your cloud is strongly encrypted.
  • A private end-to-end network — Your IoT devices will appear as an extension of your private application cloud.
  • Extended session duration — When an IoT device's traffic goes through a VPN, there are no NAT or Firewall timers to mitigate.
  • A static private IP address for each device — You can reach the device at a known address from your application cloud.

Do I need a VPN?

do-i-need-a-vpn page anchor

Most IoT use cases don't require a VPN, and you shouldn't opt for one if your application won't benefit from it. This is because setting up and maintaining a VPN connection involves increased complexity, and it comes at an additional monthly cost. Please review your use case with your IoT specialist at Twilio to determine if it warrants a VPN connection.

For example, if your use case requires sending a message from your cloud to your device, IP Commands is an alternative to Super SIM VPN. Using IP Commands, you can send short IP/UDP messages from your application cloud to your Super SIM-enabled IoT devices without the device having to maintain a persistent connection to your cloud, having to use a VPN between your cloud and the cellular network, or requiring a static public IP address for each device. Take a look at our Get Started with IP Commands guide to try out this feature.

If you do decide that your application needs a Super SIM VPN, this guide will show you how to set it up and use it.


VPN compatibility and requirements

vpn-compatibility-and-requirements page anchor

You can use whichever VPN gateway product you prefer, but it must be compliant with the well-established IKE v1 and v2(link takes you to an external page), and IPSec(link takes you to an external page) standards. Both hardware-based and software-based VPN gateways are supported.

Your peer IP needs to be static.


When the component of the Twilio Mobile Core responsible for routing traffic over VPNs is deployed, traffic needs to be moved from each of the existing instances of the component to the new instances. Currently, when this handover happens, downlink dataflows (data to the device) will experience packet loss as the old instance is replaced by a new one for up to 60 seconds (typically 10 to 20 seconds). Uplink flows (data sent from the device) will not be affected. However, for any requests made from the device that need to receive a response (e.g. a TCP handshake), the downlink portion will suffer packet loss. Once the new instance has taken over, devices will be able to exchange data over the VPN again without packet loss. Our team is exploring improvements to this infrastructure that will allow us to deploy this component without interruptions; however, we have no current timeline.

Deployments of this component typically will occur during western European business (daytime) hours and will typically be deployed every few weeks but frequency may vary depending on need. When possible, we will release changes together to limit deployments and interruptions.


Set up your VPN connection

set-up-your-vpn-connection page anchor

The first step is to contact Twilio to request access to the VPN Beta Program.

You will receive a VPN setup questionnaire which is used to collect essential setup information, including your VPN gateway details, your encryption domains (private IP subsets used in your data center), and your IKEv1/IKEv2 and IPsec details. The setup questionnaire also provides the information you will need about Twilio's VPN gateway.

The answers you provide via the setup questionnaire are used to provision your VPN on Twilio's VPN gateway. Each customer gets their own VPN connection.

(information)

Once your VPN connection is established on Twilio's VPN gateway, a unique pre-shared key (PSK) is generated and shared with you via Twilio Secure Data Transfer System.

You can then use the PSK, Twilio's VPN gateway details from the setup questionnaire, and your own encryption domains to provision your VPN gateway and initiate a VPN connection. If the gateway provisioning is performed correctly, the VPN connection will come up straight away. If this does not occur, Twilio will help you find and fix any issues.

(warning)

Warning

Twilio will use 100.112.0.0/12 for allocating static private IP addresses for your devices. Please make sure you are not using this range for the subnets in your application cloud behind your VPN gateway. If your IoT device acts like a router and provides connectivity to other devices attached to it, please make sure you don't use 100.112.0.0/12 in that subnet.


Enable VPN for your devices

enable-vpn-for-your-devices page anchor
(warning)

Warning

The following content covers how to use your VPN Connection with Super SIM once it's been configured. You must be logged into Console and have access to the Private Beta to access it. Please reach out to your IoT sales specialist or email sales-wireless@twilio.com(link takes you to an external page) to learn more about Super SIM VPN and how to gain access to the Private Beta.

1. Get your VPN connection SID

1-get-your-vpn-connection-sid page anchor

Once the VPN connection has been established, you will need to obtain its SID from the Interconnect > Connections page in the Twilio Console(link takes you to an external page):

Locate your VPN in Console's Interconnect section.
(information)

Info

You'll find Interconnect in Console's Super Network section.

Click on your VPN's name to take you to the VPN details page, and copy the SID:

Select your VPN to view and change its details.

We recommend taking the opportunity to give your VPN a memorable name at this point.

2. Enable VPN for a Fleet

2-enable-vpn-for-a-fleet page anchor

You enable devices' VPN usage at the Fleet level. We recommend that you create a new Fleet for the devices that will connect via your VPN, and maintain separate Fleets for VPN- and Internet-connected devices. By default, every new Fleet of devices uses Twilio's default Internet breakout, but this can be switched to the new VPN.

To set a Fleet's devices to connect via VPN, go to Internet of Things > Super SIM > Fleets(link takes you to an external page) in Console, click the Create Fleet button, name and configure the new Fleet, and enter your VPN's Connection SID under the VPN section:

Enable VPN for a Fleet by entering the VPN's SID in the Fleet settings.

Once you specify a VPN for a Fleet, any SIMs that you subsequently assign to that Fleet will automatically use the VPN connection. If the SIM was already connected via the Internet — for example, if you have just re-assigned it to the VPN-enabled Fleet — then it will use the VPN on its next attach. When you remove the SIM from a VPN-enabled Fleet, it will stop using the VPN at the next attach.

(information)

Info

A new attachment can be triggered using the Connectivity Reset option on the SIM's details page in Console(link takes you to an external page).


Any SIMs you assign to a VPN-enabled Fleet will automatically start using the Fleet's VPN connection. There is nothing more to do. When the VPN is being used, your devices can reach the application servers in your data center and vice versa through the secure VPN connection.


Get a device's IP address

get-a-devices-ip-address page anchor

Every SIM in a VPN-enabled Fleet is assigned its own private static IPv4 address. This address is assigned to the Super SIM when it first attaches — it is the actual IP address used by SIM's host device. After the initial assignment, the IP address persists within the SIM, and your device will be assigned the same address provided that it is using the same SIM and that the SIM remains assigned to the VPN-enabled Fleet.

You can initiate sessions — SSH, browser-based HTTPS, ping, etc. — from your data center to the device using the corresponding static IP address.

There are three ways to retrieve a device's static IP address.

The IP address assigned to a SIM is listed in Console on the SIM's details page(link takes you to an external page):

The IP address assigned to a SIM is listed in Console.

2. The IpAddresses subresource API

2-the-ipaddresses-subresource-api page anchor

The IpAddresses subresource is used to fetch the IP address assigned to a SIM. You will need the SID of the Sim resource that represents the SIM you are interested in. Here is a sample API call:

1
curl -X GET https://supersim.twilio.com/v1/Sims/HSxxxxxxxxxxxxxxxxxxxxxxxxxxxx/IpAddresses \
2
-u $TWILIO_ACCOUNT_SID:$TWILIO_AUTH_TOKEN \
3
-s |jq

This will output a JSON object containing an ip_addresses object:

1
{
2
"ip_addresses": [
3
{
4
"ip_address": "8.8.8.8",
5
"ip_address_version": "IPv4"
6
}
7
]
8
}

If the SIM is not assigned to a VPN-enabled Fleet, the value of ip_addresses will be null.

For more information on using this API, please see the IpAddresses subsresource documentation.

3. Connection Events Stream

3-connection-events-stream page anchor

If you are already subscribed to Super SIM Connection Events, you will get the static IP address assigned to your SIM as part of the "Data Session Started" event. There is no need to use either of the previous two methods to obtain the IP address assigned to the SIM.

To learn more about Super SIM Connection Events, please see Get Started with Super SIM Connection Events.

4. Update your devices' APN setting

4-update-your-devices-apn-setting page anchor

VPN usage currently requires that devices use either of the APNs super or us1.super in place of all other Super SIM APNs. If you are using the Frankfurt breakout (de1.super) or the Singapore breakout (sg1.super), please update your devices to use super or us1.super in order to access VPNs.

For more details on setting APNs, please see How to Set a Device's APN for Super SIM.

Need some help?

Terms of service

Copyright © 2024 Twilio Inc.